Sky inc.  
What's NEW Sign CuttersPrint & Cut3D Scanning3D MillingEngraversImpact PrinterSuppliesS.M.U.

Contour Cut your Dark "T" transfers


Make Full Color Outdoor Decals with your Inkjet Printer

Text Box: Hot transfers         
OverviewFeaturesSpecsTestimonial


 

Prepare your graphic as usual, then draw a .001 hairline where you want the FX to cut. Use your own standard inkjet printer with NORMAL inks to produce the graphics. Dark transfers are printed right reading, light are printed mirror.
Then Put the them into your Stika-FX, print again and it cuts the contour.
Then remove the waste around your design. For Dark material lift off your transfer and place it on the "T", for complex designs cover with pre-mask tape to hold the design together. Press for 15 seconds at 325 degrees. Then cool peel the tape. For light "T"'s, just flip the design over on your "T" and press. All TransCut material can be cool  peeled.
We supply you with everything you need to print and cut with the same program to keep alignment. We also supply the alignment tools required to set your FX system to match your printer. Your not limited to a few standard contour shapes, you can have your cut as complex as you want.
NEW Video manual.

 

 
  Brochure available!
  Download Brochure Now  

PDF Format (500 k)
 		  
  Copyright ©2004 Sky inc. All Rights Reserved.
Phone 450 449-0142