MODEL MDX-500 T-slot (XY) table size 21.625 x 14.125 in. (550 mm x 360 mm) Max. cutting area 19.625(X) x 12.938(Y) x 4.125(Z) in. (500 mm(X) x 330 mm(Y) x 105 mm(Z))   XYZ motor AC servo motor Feed rate X,Y,Z-axis: Max. 3.375 in./sec. (85 mm/sec.) Acceleration 0.3G, 0.2G, 0.1G, 0.05G Software Resolution [When RML-1 has been selected] 0.00039 in.(0.01 mm/step) [When NC codes has been selected] 0.000039 in. (0.001 mm/step) Mechanical Resolution 0.000039in. (0.001 mm/step) Spindle motor DC brushless motor Max. 400W (when with high-torque spindle) Revolution speed [High torque spindle] 3000-12000 rpm [High speed spindle] 5000-20000 rpm (Variable manually or by the command set) Tool chuck Collet or Cutter holder system Positioning accuracy 0.00394 in.(±0.1mm) / 11-13/16 in.(300 mm) (Under no-load conditions) Repeat accuracy 0.00197 in.(±0.05 mm) (Under no-load conditions) Origin-point reproducibility (when the power is switched on/off) 0.00315 in.(±0.08 mm) Possible table load weight [0.3G]  26.5 lb(.12 kg) or less [0.05G]  33.1 lb.(15 kg) or less Interface Parallel (in compliance with the specification of Centronics) Serial (under RS-232C standard) Buffer size 2 Mbyte Instruction system ( Replot buffer: [RML-1] 2 Mbyte [NC codes] Max. 2 Mbyte (end-user setting) ) Control keys COPY, XY, Z, +Z(Tool down), -Z(Tool down), PAUSE, SPINDLE, FAST FEED, JOG EXIT, ENTER, Dial, EMERGENCY STOP switch Power consumption 6.5 A/117V    3.5 A/220-230V     3.5A/240V Dimensions 29.125in.(W) x 33.062in.(D) x 26.375in.(H)  (740 mm(W) x 840 mm(D) x 670 mm(H))  Weight 202.8 lb. (92 kg) Operation temperature 41-104°F (5-40°C)  Operation humidity 35-80% (no condensation) Accessories T-slot clamps: 4, Spanner: 1(10 mm(3/8 in.)), Z0position sensor: 1, Power cord: 1, Key connector: 1,USER'S MANUAL: 3(1 Setup & Maintenance, 2 Cutting Using the Included Software, 3 Cutting Using NC codes),NC-code PROGRAMMER'S MANUAL: 1, Roland Software Package CD-ROM: 1
		Brochure available!
		Download Brochure Now
		PDF Format (1 meg)