|
MODEL |
EGX-30 |
|
TABLE SIZE |
12 in. x 8-1/16 in. (305 mm (X) x
205 mm (Y)) |
|
MAX. OPERATION AREA |
12 in. x 8-1/16 in. (305 mm (X) x
205 mm (Y) ) |
|
FEED RATE |
118-1/16 in. (X, Y-axis: Max. 3.0
m)/min. (1-15/16 in. (50 mm)/sec.) |
|
MECHANICAL RESOLUTION
|
0.000394 in. (0.01 mm)/step
0.0000492 in.(0.00125 mm)/step ( micro-step control ) |
|
SOFTWARE RESOLUTION
|
0.000394 in. (0.01 mm)/step |
|
DISTANCE ACCURACY |
Whichever the greater value of
0.00394 in. (0.1 mm) or 0.5% of moving distance |
|
RIGHT-ANGLE ACCURACY |
12-1/16 in.( 0.0394 in.) (1 mm (305
mm)) |
|
SPINDLE MOTOR |
15 W ( DC motor ) |
|
REVOLUTION
SPEED |
5,000 --- 10,000 rpm |
|
ENGRAVING TOOL MOUNTING
DIAMETER |
3.175 mm (1/8 in.) |
|
INTERFACE |
Parallel (in compliance with the
specification of Centronics)
Serial (under RS-232C standard) Automatic switching |
|
INSTRUCTION SYSTEM |
CAMM-GL II mode2 |
|
POWER CONSUMPTION |
0.6 A / 117 V 0.4 A / 220 to 230 V
0.4 A / 230 to 240 V |
|
ACOUSTIC NOISE LEVEL |
Operation mode: 70 dB (A) or less
Standby mode: 40 dB (A) or less
(According to ISO 7779) |
|
EXTERNAL DIMENSIONS |
20-1/4 in.(W) x 19-3/8 in.(D) x
8-9/16 in. (H)(513 mm (W) x 491 mm (D) x 217 mm (H) ) |
|
WEIGHT |
15.5 kg (34.2 lb.) |
|
OPERATION TEMPERATURE |
5 to 40 C (41 to 104 F) |
|
OPERATION HUMIDITY |
35 to 75% ( no condensation ) |
|
ACCESSORIES |
Power cord: 1, Dust collector hose
and duct: 1, Engraving cutter: 1, Engraving-tool holder: 1,
Diamond cutter adapter: 1,
Hexagonal screw driver: 1, Spanner: 1, Hexagonal wrench: 1, Test
material: 1, Adhesive sheet for securing material: 1,
Roland Software package CD-ROM: 1, User's manual: 1 |
PDF Format (171 K)