MODEL	CX-300	CX-400	CX-500
Mechanism	Media-movement method
Driving Method	Digital control servo motor
Maximum Cutting Area	29" x 984-1/8" (737mm x 24,998mm)	39"x 984-1/8" (1000mm x 24,998mm)	47" x 984-1/8" (1,195mm x 24,998mm)
Acceptable Media Width	2" to 36" (50mm to 915mm)	3-1/2" to 46" (90mm to 1,178 mm)	3-1/2" to 54" (90mm to 1,372mm)
Cutting Speed	During cutting: 850 mm/sec. (in all directions) During tool-up: 1,202mm/sec (in 45º direction)
Cutting Force	20 to 350 gf
Mechanical Resolution	0.000492"/step (0.0125 mm/step)
Software Resolution	0.000984"/step (0.025mm/step)
Distance Accuracy	Error of less than ± 0.2% of distance traveled, or 0.000394 (0.1mm), whichever is greater
Repetition Accuracy	0.1mm or less (excluding stretching/contraction of the material) Range for assured repetition accuracy For materials with a width exceeding 24" (610mm): Length 157-7/16" (4,000mm) (CX-400/500 only) For materials with a width of 24" (610mm) or less: Length 314-15/16" (8,000mm)
Interface	Parallel (Centronics compatible), USB (Rev. 1.1)
Buffer Size	2 MB (1.3MB for replot buffer)
Instruction System	CAMM-GL3 (mode1and mode2)
Power consumption	Maximum: 0.8 a/100 V to 240 V ± 10 % 50/60Hz
Acoustic noise level	Cutting mode: under 62 dB (A) Standby Mode: under 40 dB (A) (According to ISO 7779)
Dimensions	45-1/16"(W) x 28-5/8"(D) x 43-13/16"(H) 1,144 mm (W) x 727 mm (D) x 1113 mm (H)	55-3/8"(W) x 28-5/8"(D) x 43-13/16"(H) 1,407 mm (W) x 727 mm (D) x 1113 mm (H)	63-1/16"(W) x 28-5/8"(D) x 43-13/16"(H) 1,602 mm (W) x 727 mm (D) x 1113 mm (H)
Weight (with stand)	101.4lb. (46 kg)	116.8lb. (53 kg)	130.1 lb. (58 kg)
Standard Accessories	Power Cord: 1, Blade (ZEC-U5025): 1, Blade Holder (XD-CH3): 1, Alignment tool: 1, Cable Clamp: 1, Replacement blade for separating knife: 1, Roland software package: 1, Startup Manual: 1, Safe Use Manual: 1